These Windmill Aeration Systems include (qty 2) dual rubber membrane diffusers, and 200' of weighted airline.
Options include the following sizes:
The 12' tower is our lowest tower height windmill – works well if you have no trees around and are located in a higher wind area. The windmill compressor and head is the same unit for all tower heights.
The 16' tower produces approximately 10% more aeration than the 12 FT tower height due to the elevated height of the tower. The head diameter measures a full 73″ making this the largest in the industry.
The 20' tower produces 20% more wind at the elevated height compared to the lower height windmills. The blade diameter on all units is a full 73″ in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10′, 20′ or even 30′ deep.
The 24' tower is one of the TALLEST windmills on the market! It stands over 27 feet tall when fully erected. The blade diameter on all units is a full 73″ in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10′, 20′ or even 30′ deep. This tower will really catch the wind!
The Wind Driven Aeration Systems offer:
“BalCam II” technology minimizes bearing fatigue with new Stainless Steel components
Patent pending new design
Fast & Easy Assembly
Manufactured with high quality 18 gauge galvanized steel
Newly redesigned blades and front dome assembly for better air flow
Self-governing head to protect the unit in high winds
New secure locking mechanism that attaches the windmill head to shaft
Larger check valves and upgraded ½” airline to handle the increased air that is produced
High Air Output – 3.0-4.5 CFM rating Rated at 30 psi
Full 5-year warranty on bearings and cams!